Syarikat Instraco (M) Sdn Bhd

 

PV Series


The PV amplifier features a two-way crossover and sub-sonic (low-cut) filter for each channel. Crossover frequencies are fixed at 150 Hz, allowing subwoofers to be driven at extremely high sound pressure levels, and the filters cut at 40 Hz to prevent low-end rumble. Using proven technology gained through years of amplifier design, this unit takes advantage of rugged TO-3P output devices mounted on massive aluminum extrusions and dissipates heat via an extremely quiet and effective two-speed fan. PV amplifiers are designed to operate at line voltages as low as 50% of nominal, employing mammoth toroidal power transformers and offering impressive specifications and features not found on similarly priced competitive units. This amp is designed to drive a 2-Ohm load per channel, thus achieving awesome performance levels into 4 Ohms in BRIDGE mode. PV amplifiers are ruggedly constructed, rack-mountable pieces of gear with superb patching capability, allowing superior flexibility in application. Front panel features include calibrated, detented gain (dB) controls and LED indicators for power (PWR), signal presence (SIG), Thermal Protection indicator, and DDT™ activation on each channel, as well as a rocker mains POWER switch. The back panel contains an IEC connector, line voltage selector switch, dual primary uses, and the critical cooling fan opening. This opening should have an adequate supply of cool air and should never be blocked or restricted. Also on the back panel are the input and output sections, including an input barrier strip for permanent installations. Each channel input section includes a combo XLR / TRS phone jack connector, THRU/LOW out and HIGH out TRS jacks, and activation switches for the LOW CUT filter and crossover (150 Hz XOVER). Channel output sections feature dual shock-proof binding posts and four-conductor twist lock connectors. An additional four-conductor twist lock connector allows BRIDGE mode output.

 

PV 1

Features

• Weight Packed: 34.28 lb(15.55 kg)

• Width Packed: 19.5"(49.53 cm)

• Height Packed: 21.5"(54.61 cm)

• Depth Packed: 6.5"(16.51 cm)

 

PV 2

Features

• Weight Packed: 38.03 lb(17.25 kg)

• Width Packed: 19.5"(49.53 cm)

• Height Packed: 21.5"(54.61 cm)

• Depth Packed: 6.5"(16.51 cm)

 

PV 3

Features

• Weight Packed: 62.83 lb(28.5 kg)

• Width Packed: 20"(50.8 cm)

• Height Packed: 21.65"(54.991 cm)

• Depth Packed: 6.8"(17.272 cm)

 

PV 4

Overview

The Peavey PV 4 is a power amplifier designed for years of reliable, flawless operation under rigorous use. This amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, while remaining surprisingly compact. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The PV 4's high-efficiency design uses tunnel-cooled heat sinks and variable-speed DC fans. This cooling topology maintains a lower overall operating temperature, resulting in longer output transistor life.

 

Features

• Weight Packed: 69.44 lb(31.5 kg)

• Width Packed: 20"(50.8 cm)

• Height Packed: 21.65"(54.991 cm)

• Depth Packed: 6.8"(17.272 cm)

 

PV 900

Overview

The PV® 900 delivers 300 watts per side into 4 ohms, 180 watts into 8 ohms and features detented input gain controls. It's a real workhorse.

 

Features

• Two built-in 150 Hz crossovers

• 300 watts (rms) per channel at 4 ohms

• 180 watts (rms) per channel at 8 ohms

• Separate Speakon® mono bridge output

• Two-speed demand-sensitive fan

•  2-rack-space stereo power amp featuring DDT protection

• Weight Unpacked: 28.00 lb(12.7 kg)

• Weight Packed: 35.00 lb(15.876 kg)

• Width Packed: 6.25"(15.875 cm)

• Height Packed: 22.62"(57.4548 cm)

• Depth Packed: 21"(53.34 cm)

 

 

Audio Processors

 PV Series

 VSX Series

 DIGITOOL Series

 

Equalizers

 PV Series

 QF Series

 

Microphones

 PV Series

 PVM Series

 Studio Pro Series

 

Musical Instrument

 Musical Instrument

 

Non Power Mixers

 FX2 Series

 PV AT Series

 PV Series

 

Portable P.A

 Audio Performer Pack

 Triflex

 Escort

 P2

 

Power Amplifiers

 CS Series

 IPR2 Series

 PV Series

 

Powered Mixers

 PVi Series

 XR Series

 

Speaker Enclosures

 DM Series

 Impulse Series

 PR Series

 PV Series

 PVXp Series

 EU Series

 SP BX Series

 Versarray Series

 

Discontinue Model

Non Powerd Mixers

 FX Series

 PV Series

 

Power Amplifiers

 IPR Series

 PV Series